Did you guys know about 40% of automobiles fail the MOT test on the first attempt? Worse, over half of the flaws discovered throughout the test may have been prevented! Before you go to the MOT Harlow testing centre, conduct some easy inspections and maintenance to save time and money and assist your car pass the very first time.
The Tyre Shop Harlow has created a list of the best techniques to prevent failing the MOT test.
Tread Depth of a Tyre
The MOT test failure might also be caused by improper tread depth. Tyres with poor tread have restricted gripping abilities and might put people’s lives at risk. You should inspect the ground clearance at home on a regular basis. Furthermore, if somehow the tread depth was much less than 1.6mm, the tyre is considered prohibited.
Windscreen
It is critical to have a strong vision of the path ahead when driving. If it is obstructed in any way, you may fail the MOT test. If the damage to the windshield is more than 10mm inside the sweeping area right at the front of the driver (is called ‘zone A’) or 40mm inside the site boundary of the windshield (is called ‘zone B,)’ you will have to get it replaced. Any damage that is less than 10mm or 40mm may occasionally be rectified, so get it professionally assessed by an expert before your MOT test.
Brakes
If your brakes aren’t working as well as they used to, they’re making unusual noises, or your car pulls to the side when you brake, you should have them tested right away. Damaged or malfunctioning brakes are an instant MOT fail. As well as they pose a major risk to yourself and other road users. It also is a good time to look at your braking fluid balance. You must top them up if they’ve dipped below the acceptable levels.
Mirrors
Your vehicle’s mirrors significantly assist the driver’s vision of the traffic, so be sure the rearview mirror and wing mirrors provide a clean and unencumbered view. Check to see whether the mirrors are cracked or damaged, whether they are, and have them fixed well before the MOT test. You must also wipe them because the MOT inspector may observe that your vision is not obstructed in any way.
Body of the Vehicle
Make sure your vehicle’s body has no major damage, like jagged edges, that might cause harm to other cars or people. Furthermore, while your automobile will not be evaluated for cleanliness during the test, it is a good idea to clean it before the test because MOT inspectors may refuse to test a dirty vehicle. A clean automobile may also offer the appearance that your vehicle has been well managed and cared for. This may help you make a good first impression during the MOT test.
Lights
As per DVSA, the vehicle’s lights account for 30%* of every MOT problem. Checking the lights is, fortunately, one of the simplest exams you can undertake at home. Simply ensure that your fog lights, headlights, and indicators, are in functioning order by turning them on. Get someone to wait behind your car as you push the foot brake to check if your brake power comes back on when you really need them. If you have a damaged bulb, you may either buy a new one or install it yourself using the instructions in your car’s owner’s manual. You can also contact The Tyre Shop Harlow if you don’t feel comfortable doing so.
It’s also important to note that wrongly coloured lights may result in a failed MOT test. If you did not have your lights put on by the manufacturer, be sure these are legal. The brake lights should be red, while the headlights must be white.
Condition of the Tyres
You should inspect your tyre sidewalls for damage such as cuts, cracks, bulges, and lumps as these might cause the MOT test failure. If you see such damage, call a tyre professional right once because these factors might compromise your tyres Harlow safety.
Washers and Wipers
Windscreen washers and wipers add to a driver’s perspective of the roadway, even if they might not appear to be crucial to safe driving. Check to see whether the wipers are working and if there are signs of problems. Before going to the MOT test, you must refill the screen washer and test the washers.
Seatbelt
In case you would like your car to pass the MOT examination. You have to make certain the seat belts will be in very good condition and that they’re working properly. You need to additionally give each belt a good tug to make sure that it’s protected and that it is in a position to take the strain.
The Tyre Shop Harlow is the place to go for your next MOT Harlow.