You’re likely to have tried some DIY home improvements if you are a homeowner. Some jobs are easy and fun for those who are handy. You can also save money by doing the job yourself. If you have the right tools and the desire to do the job yourself, such as installing blinds or painting a wall, you can install new cabinets, replace a door, or hand it over. These jobs are easy to do, even if they go wrong. It may bother you, but a slightly crooked door will not hurt anyone. This is not true for electrical work. You can’t do a DIY electrical project right if you make mistakes. Your new fixture, outlet, or other fixture won’t work. At worst, you could cause a shock or even a fire. An electrician is a good choice to run new wires. This will keep you and your family safe from any improper wiring that could cause harm to your home or your neighbor’s homes. These are just a few situations where you should call an electrician services Bensalem.
- Your Circuit-Breaker keeps tripping
A tripped circuit breaker isn’t a major problem. It’s usually easy to simply go to the circuit breaker and turn the electricity on again. Your circuit breaker should trip once in a while to ensure your safety. Circuit breaker trips when it senses an unsafe power surge. This could cause damage to your appliances, or in rare cases, a fire. If your circuit breaker trips more than once a week, an electrician may be needed. Frequent power surges could indicate the overloading of your electrical system. This is more common in older homes. Electrical systems were designed to support a small number of appliances in the past decades. Nowadays, homeowners have more electrical devices than ever before, including televisions, microwaves, computers, and other electronic gadgets. An electrical system not designed for all these devices can overload it and cause damage to your appliances, or even cause a fire. This problem can be solved by adding power outlets and circuits to the home. This type of work should only ever be done by licensed electricians.
- Your Outlets Only Have 2 Prongs
This is another problem more prevalent in older homes. Many older appliances weren’t grounded. Grounding makes an electrical circuit more secure, but it is necessary to use a three-prong outlet and plug. The grounding wire is the round third prong. You may experience difficulty plugging in modern devices if your home does not have three-prong outlets. Three-prong outlets are common for electronics, such as computers and TVs. Three-pronged extension cords will almost always be grounded if you need them. A licensed electrician can add a grounded circuit. It is relatively simple to work. It is not something you can do yourself. Making mistakes in wiring can lead to dangerous shocks and fires. A licensed electrician is the best person to help you update your home’s wiring and install grounded outlets.
- Outlets have black burn marks
According to the old saying, smoke is fire. Although it isn’t exactly the case with the burn marks on your outlets this should be enough to trigger an immediate alarm. A black burn mark on an outlet is a sign that a wire has become loose and is arcing, causing a spark. Sparks in your walls can be dangerous and can cause fires if they aren’t addressed. There are many reasons wires may become loose, but most of the time it is due to aging. The wires contract and expand slightly as electricity passes through them. Aluminum wiring is a common choice for homes built between 1965-1975. As the outlet’s connection is gradually loosening, the electricity must jump over a small gap. This jump is what causes the burn marks. A licensed electrician should immediately attend to any outlet that has burn marks. This should be treated as a serious fire hazard.
- Light switches and outlets feel warm or tingly
Sometimes, it can be nice to feel warm and tingly. When you flip a switch or plug in something to an outlet, it’s not the right feeling. You may have poor insulation wires. If the outlet or light switch feels warm, likely, they are not properly insulated. It is similar to loose wires that can cause burn marks. These are potential fire hazards and should be addressed immediately. Similar to the tingling sensation you get when you flip a light switch you may feel an electric shock. You won’t be shocked if your wires are properly insulated and securely fastened. If you feel an electric tingle, likely, that you’re wiring is not in good condition. An electrician licensed can diagnose the problem and correct it before it becomes dangerous.
- You Have Wires Galore
You could be overloading your power circuits if you use extension cords, power bars, or outlet extenders. Your home may have fewer outlets than what you use, so it wasn’t designed to handle the power you draw. It is dangerous to overload your home’s electric system. Overloading your home’s electrical system can cause damage to appliances and even fires. Extension cords and power strips that are overloaded can become hot and spark.
You can add outlets and run new circuits. It’s not only dangerous, but it is a bad idea to run electrical wiring yourself. This job requires a licensed electrician.
Business Name:- AMR Service Group
Contact No:- (215) 447-8985
Address:- 3370 Progress Drive Unit K
Bensalem, PA 19020
